Sales & Support: +44 (0) 1527 959 099

CO2 Laser Refill Service

TLM Laser can repair and refill most CO2 Laser tubes - whether DC or RF Excited.

Call us for more information on +44 (0) 1527 959 099 or go to the Contact Page

With a quick and efficient turnaround, you can either send the tubes directly to us or we can visit your facility and remove them for you.

C02 laser refill

We will refill your tube to produce the same output power achieved by the original manufacturer. All cavity optics, alignment and cleanliness will be checked as part of the process and in most cases would hope to turn the unit around within 10 working days. (Subject to workload and any spare parts required)

This applies to CO2 scan head based and Plotter table systems. All too often we find that the Manufacturer on the outside of the system is not necessarily the manufacturer of the laser source. For plotter tables there are many manufacturers such as RS, CTR, Redsail, Gravograph, Hobart, Epilog, GCC, Trotec just to name but a few but generally speaking they use the same sources from the same manufacturers, such as:-

  • Rofin Sinar
  • Coherent
  • Deos
  • Synrad
  • Spectron

We can offer our re-gas service for most makes and models. In addition for RF Excited systems we also offer a repair service for the RF Power supply units. This is available for most makes and models.

Refill service on Chinese glass DC CO2 tubes

TLM are pleased to announce that we can now offer a refill service on Chinese glass DC CO2 tubes from 20-140 watt for £500.00+VAT per tube. This price applies to a straight forward refill and does not include any optical work. However we would examine the tube on receipt and If deemed recoverable it will also come with a 6 month warranty (subject to terms and conditions). So when this is compared to replacement costs, VAT, duty and shipping costs added to the tube being shipped from the far east. Along with the risk of a  dead on arrival or damaged tube, which we hear about all too often, it makes economic sense to have it repaired in the UK.

Turnaround typically is 10 working days. All repairs are carried out by skilled UK technicians and we can also offer replacement tubes for replacement or upgrade to higher powers. Unless you are global company then dealing with the far east when you have a problem can be frustrating or difficult, therefore local support has to give a massive advantage and enable you to have a much higher percentage of uptime on your equipment. This will of course equate to better profitability. Call TLM for further details.